What are common types of battery failures?
Battery bulging
Battery bulging occurs when the battery casing deforms due to internal gas expansion. This phenomenon is usually caused by abnormal chemical reactions within the battery. Bulging not only affects battery performance but can also pose a safety hazard. Guheng Energy’s high-quality batteries utilize advanced materials and technologies to significantly reduce the risk of bulging, ensuring user safety.
Battery capacity degradation
Battery capacity inevitably degrades over time. This means the vehicle’s range on a full charge decreases. Guheng Energy has optimized battery materials and structural design to effectively slow capacity degradation, providing users with a longer battery life.
Charging abnormalities or failure to charge
Charging abnormalities or failure to charge is another common problem. This can be caused by a variety of reasons, such as incompatible charging equipment and damaged battery connectors. Guheng Energy provides highly compatible and durable charging equipment to ensure smooth charging every time.
How can I determine if my battery is faulty?
Dashboard Alarm
Modern new energy vehicles are often equipped with intelligent dashboard systems that automatically issue alarms when they detect battery anomalies. Users should pay attention to these alerts so they can take prompt action.
Significant Range Decrease
If your vehicle’s range suddenly decreases significantly under normal use, this may be due to battery degradation or other potential issues. Through regular inspections and maintenance, Guheng Energy helps users detect and resolve such issues promptly.
Abnormal Battery Temperature Rise
Excessive temperature rise is a precursor to many battery problems. If you notice an abnormally high battery temperature while your vehicle is operating or charging, immediately stop using it and have it inspected. Guheng Energy incorporates efficient heat dissipation technology into its product design to effectively reduce the risk of temperature anomalies.
Common Causes of Battery Failure
Excessive Use in High-Temperature Environments
Extended exposure to high temperatures accelerates battery aging, leading to performance degradation. Therefore, in summer or in hot regions, try to park your vehicle in the shade. Guheng Energy recommends that users regularly check the vehicle’s interior temperature to maintain optimal operating conditions.
Frequent Fast Charging
While fast charging can save time, frequent use can negatively impact battery life. To protect your investment, Guheng Energy recommends balancing fast and slow charging to extend battery life.
Battery Management System (BMS) Abnormalities
The BMS monitors and manages the entire powertrain. A malfunction can directly impact vehicle performance. Guheng Energy provides advanced and stable BMS solutions to ensure proper system operation.
Using Inferior Charging Equipment
Using unqualified or inferior charging equipment can cause irreversible damage to your vehicle. Therefore, choosing a reliable brand is crucial. Guheng Energy provides customers with rigorously tested, high-quality charging equipment to ensure a safe and worry-free charging experience every time.
In summary, understanding the common types of battery failures in new energy vehicles and their causes can help owners better maintain their vehicles, improving their range and safety. Furthermore, choosing a supplier like Guheng Energy, dedicated to quality and innovation, will ensure a better, longer-lasting driving experience. If you have any questions or require further information, please feel free to contact us and we will be happy to assist you.
How can you prevent battery failure during daily use?
Proper operation and maintenance can effectively prevent battery failure during daily use. Below are some practical tips to help you extend the life of your new energy vehicle battery.
Reasonably Control Charge and Discharge Frequency
New energy vehicle users should avoid frequent deep discharge and overcharging. Deep discharge accelerates battery capacity degradation, while overcharging can cause battery overheating and even damage. It is recommended that users charge when the vehicle’s remaining charge is less than 20%, and disconnect the charger promptly after full charge to keep the battery in optimal working condition. Guheng Energy provides an intelligent charge and discharge management system that automatically optimizes charge and discharge frequency, effectively extending battery life.
Avoid prolonged parking in extreme weather conditions
Extreme weather conditions significantly affect battery performance. High or low temperatures inhibit the chemical reactions of lithium-ion batteries, leading to performance degradation. Therefore, in hot summers or cold winters, vehicles should be parked in a cool or warm environment as much as possible. Guheng Energy’s product design incorporates advanced temperature control technology to maintain stable performance in various climates.
Regularly Check Battery Status
Regular inspection and maintenance are crucial to ensuring the proper operation of new energy vehicles. Users can monitor battery health, including capacity, internal resistance, temperature, and other parameters, using the vehicle’s built-in diagnostic system or specialized testing equipment. Immediately address any abnormalities. Guheng Energy provides comprehensive testing services and equipment to help users easily understand the condition of their vehicles.
Use Original Charging Equipment
Choosing the right charging equipment is crucial to protecting new energy vehicles. Using incompatible or inferior chargers can cause charging problems, damage to the connector, and other issues, which can affect vehicle performance and safety. Therefore, users are advised to always use high-quality, genuine or certified charging equipment. Guheng Energy provides genuine chargers that have undergone rigorous testing and certification to ensure a safe and reliable charging process every time.
What professional testing and maintenance equipment does Guheng Energy provide?
Guheng Energy is committed to providing high-quality and efficient testing and maintenance solutions for new energy vehicle users. Below is an introduction to some of our core products and their advantages:
Company Profile and Core Advantages
The company is dedicated to the development of new energy service technologies (electric vehicles and energy storage), particularly the development of diagnostic, testing, and maintenance equipment, data chains, and service processes for new energy vehicles, focusing on the three major components of the vehicle, and provides a comprehensive suite of professional solutions.
PBM-SP-B-0120: Portable Single-Cell Battery Maintenance Instrument
The PBM-SP-B-0120 is a portable single-cell battery maintenance instrument launched by Guheng Energy, specifically designed for new energy vehicles. Its lightweight and portable design makes on-site operation easier, making it an ideal choice for vehicle owners seeking to perform independent battery maintenance.
LQM-SL2: Portable Airtightness Leak Tester
The LQM-SL2 is a high-precision portable airtightness leak tester used to detect leaks in powertrain systems. Utilizing advanced sensor technology, it can quickly identify even tiny leaks and provide repair recommendations, effectively preventing performance degradation and safety hazards caused by leaks. At Guheng Energy, we firmly believe that high-quality products are the foundation of customer trust, and therefore every LQM-SL2 undergoes rigorous testing to ensure its reliability and durability.
By combining appropriate precautions with specialized tools, vehicle owners can better manage their new energy vehicles, improving their operating efficiency and extending their service life. If you are interested in our products or require more information, please feel free to contact us and we will be happy to assist you.
